Heat Press Instructions

Heat Press Instructions

Follow these instructions to ensure proper adhesion, durability, and long-lasting results for your DTF transfers.

Recommended Settings

  • Temperature: 315–325°F
  • Time: 6–12 seconds
  • Pressure: Medium to firm
  • Peel: Hot peel

👉 Settings may vary slightly depending on your heat press and garment.

Step-by-Step Application

1. Pre-Press the Garment

Press the garment for 3–5 seconds to remove moisture and wrinkles.

2. Position the Transfer

Place the transfer on the garment exactly where you want it. Make sure it is flat and aligned properly.

3. Press the Transfer

Apply heat using the recommended settings above with medium to firm pressure.

4. Peel Immediately (Hot Peel)

Peel the film off right after pressing while still hot.

👉 Peel smoothly and evenly — do not rush or yank.

5. Repress for Durability

Cover with Teflon or parchment paper and press again for 6–12 seconds.

👉 This step improves wash durability and finish.

Important Tips

  • Use a quality heat press (not a household iron)
  • Apply even pressure across the entire design
  • Make sure the surface is flat and stable
  • Avoid pressing over seams, zippers, or uneven areas

Fabric Compatibility

DTF transfers work best on:

  • Cotton
  • Polyester
  • Cotton/Poly blends
  • Most standard apparel fabrics

Washing Instructions

To extend the life of your print:

  • Wait 24 hours before washing
  • Turn garment inside out
  • Wash in cold water
  • Avoid bleach
  • Tumble dry low or air dry

Common Issues & Fixes

Peeling or lifting edges
→ Increase pressure and repress

Design not sticking properly
→ Check temperature and press time

Dull or faded look
→ Ensure proper repress and correct temperature

Final Reminder

Proper application is critical.

👉 Incorrect heat, pressure, or timing will affect results

We are not responsible for application errors.

📲 Need help? Call/Text: 631-484-8141

👉 Order your DTF transfers today and press with confidence